Stand-alone People Counters
These stand-alone counters include a digital readout of traffic. They
do not connect to a computer and they only record the total number of
people that walk past the device. The count can be reset to zero
manually using a magnet when required. These units do not measure the
times of day your visitors enter, unless you record this yourself using
a manual system.
If budgets don't allow you to install WinCounter immediately you can
install this lower-cost stand-alone counter as an interim measure. Once
you have installed this unit at your store it is easy to upgrade to
WinCounter people counting software later. The sensors supplied with
these counters can be connected to WinCounter when you decide to move up
to a full software based people counting system so you only need to add
WinCounter software and an appropriate WinCounter interface unit.
A typical installation uses a retro-reflective beam sensor but it is
possible to use a wide range of
sensors or switches with these counters.
Prices start at US$299.00 for a kit containing a stand-alone counter,
sensor, reflector, plug-pack power supply* and mounting bracket.
* Power supplies are suitable for US,UK,AU,NZ please confirm your
local electricity requirements before ordering.
Click here to order now.